LEAD TIME IS APPROXIMATELY 4-6 WEEKS.
Width: 11 1/4 inches (286mm)
Height: Same as OEM/stock
Available as a Foam and Cover Kit for the OEM pan. It DOES NOT include the seat pan.
This is Version 2 of the seat. Seat Concepts has improved upon the initial design with this new shape.
MANUFACTURER WARRANTY: Seat Concepts provides a 1-year product defect warranty to the original purchaser. This does not cover abuse, impact (crash) damage, cross threaded or stripped mounting bolts/inserts, damage done during customer installation or sun-faded colors. Excessive wear or abrasion at the knee area is common to riders who wear knee braces or grip tightly with their knees, and is also not covered under warranty. For warranty claims, we will attempt to verify the issue as best we can with pictures, but in some cases an item must be sent directly to Seat Concepts for a hands on inspection. If the product is found to have a defect, Seat Concepts will, at their discretion, repair or replace the item. MX1 Canada will work with Seat Concepts on your behalf to help resolve any issues, however MX1 Canada is not responsible for shipping fees or other charges related to warranty claims. Proof of purchase will be required before a warranty claim can be opened.
A Complete Seat comes fully assembled on a Seat Concepts pan, and is ready to ride. The Foam & Cover Kits consist of a foam and a cover which you will need to install on an OEM seat pan.
Seat Concepts seat pans are designed to be replicas of the OEM pan, however these are not actual OEM or factory seat pans. On certain models, Seat Concepts has made durability improvements or changed the shape of the pan to allow for a greater foam thickness or to increase pan durability if an issue exists with the OEM pan.
All Seat Concepts seats are constructed using their proprietary foam material that is a much higher quality than the OEM seats, and is generally softer than most stock foams. We often hear from experienced riders that the seat that came with their new bike is terrible. Whether it's a new bike or not, replacing the seat can make a huge difference in how much you want to ride your bike. Seat Concepts seats will provide a more plush and active ride while still offering the necessary amount of support.
MX1 Cananda does not offer custom foam density. The standard density foam works well within a weight range of 165-265 lbs. If you are below or near the lower range, or if you are on the higher side of this weight range, you will have to contact Seat Concepts directly for a consultation and/or to purchase custom foam density.
COMFORT, COMFORT LOW and COMFORT TALL seats have a unique seat shape that maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
COMFORT XL seats are designed with an ultra-wide seating platform to improve the weight distribution of larger stature riders. The frontal portion of the seat maintains the OEM profile for when things get technical to allow optimal maneuverability. Only available for some models.
COMMUTER seats are the best choice for extended pavement riding and mellow offroad. The unique shape and added width will provide greater enjoyment and increased range on a long commute or dual sport ride. Only available for some models.
RALLY seats are designed to provide you with an open cockpit for increased mobility during technical riding. Only available for some models.
RACE 2.0 seats have been developed in cooperation with professional athletes and race teams. The Race 2.0 is the ultimate in style and function for the aggressive racer or rider. Extra traction ribs help hold the rider in place under hard acceleration, big braking bumps or technical obstacles. Only available for some models.
HARD ADVENTURE 2.0 seats are ideal for riders who are doing a lot of technical riding and are looking for ultimate low profile and high grip seat. Only available for some models.
ELEMENT seats provide all the benefits of the Comfort line but with added perks. Whether you're an aggressive rider looking to get more traction along with unmatched comfort, or fighting off a waterlogged seat in the summer and an ice block in the winter, the Element seat is the ultimate tool for any off-road enthusiast. The Element seat comes with four traction ribs at the rear to keep you firmly planted in the cockpit comprised entirely of gripper material. Element seats are seam-sealed on the inside to prevent water from penetrating into the foam, and before the cover is installed, each foam is covered with a thin water barrier as added protection from the elements. Rain, snow, mud, or anywhere in between the Element seat is a must-have for year-round use. Only available for some models.
SPORT TOURING seats have been built up at the front to counteract the natural forward slope of the OEM seat and have a slimmer profile allowing for a more relaxed feel. Only available for some models.
*IMPORTANT NOTE ABOUT LOW SEATS: Be aware that some comfort will be sacrificed by choosing a lower seat. To reduce seat height, some material must be removed, and the foam density has to be increased to provide enough support. For this reason, there will be a 25% RESTOCKING FEE and return shipping charges are the responsibility of the customer. Original shipping/handling charges, if any, are non-refundable. You can read our Return Policy here: https://www.mx1canada.com/mx1-canada-shipping-and-returns.html
*Seat Concepts is constantly striving to improve their products and they frequently make minor changes to the cover material or patterns. As a result, pictures on our site may not exactly match the currently available product on the Seat Concepts website. We will notify you immediately if the seat cover you selected is not available and will provide alternate options.
Covers are made of water-resistant vinyl but the seams are not sealed. Water will still be present at the seams until the cover dries inside and out. All Complete Seats are supplied with plastic already installed. If you are purchasing a Foam & Cover Kit, a sheet of thin plastic is provided in the kit.
We recommend using a mild detergent/cleaning solution, warm water, and a soft scrub brush to clean your new seat. Do not use a pressure washer to clean the seat and do not submerge or soak the seat. Do not put your seat in the dishwasher (yes, someone actually did that) and stay away from any harsh chemicals or solvents. Leave the seat to dry naturally in a warm area (sun is ideal). Do not use a heat gun, fire, or any sort of propane heater.
Details: Most popular top seat material for majority of the Comfort product lines. High performance, high grip material designed to hold the rider in position and limit slip. Recommended for use with purpose built motorcycle gear. Texture is similar to a low grit sandpaper.
Details: Popular top seat material for majority of our Comfort product lines. High performance, Limited slip material designed to keep the rider in position but allows free movement about the seat. Recommended for use with casual clothing (Jeans/Carhart materials) but will also work with purpose built motorcycle gear. Texture is a beaded cross weave.
Details: Vinyl based semi-smooth material. This material provides classic Seat Concepts style and is common choice as an accent for their Comfort line of seats. This texture provides low grip and allows unrestricted movement for the rider.
Details: High performance Italian material designed to replicate the texture and aesthetics of Factory KTM and Husqvarna seats. Texture provides a moderate level of grip but still allows rider to move about the seat with limited restriction.
Details: High performance material designed to provide a mechanical gripping characteristic. This texture provides a high level of grip and limits movement on the seat in all conditions.
Details: Synthetic suede like material. This material is designed to match the factory synthetic suede that is commonly use on production Street and Adventure motorcycles. This texture provides a soft suede like feel that is highly flexible. The natural conformity of this material gives a moderate level of grip but still allows the rider to move about the seat.
NOTE: Each style is not available for every model application. The available options for each model are limited to those shown in the selection menu on each product page.
Seat Concepts Foam & Cover Kit Kawasaki Versys-X 300 | COMFORT has been added
View Order / Checkout
Continue Shopping